Basic Info.
Model NO.
HTPV-07
Origin
China
Product Description
Wet leakage current test lab tester
Purpose
It's to evaluate the insulation of the module under wet operating conditions and verify that moisture from rain ,fog, dew or melted snow does not enter the active parts of the module circuitry , where it might cause corrosion, a ground fault or a safety hazard.
Standard
According to IEC61215 MQT15 & IEC61730 MST17 testing standard requirement
Product specification:
Company profile
Purpose It's to evaluate the insulation of the module under wet operating conditions and verify that moisture from rain ,fog, dew or melted snow does not enter the active parts of the module circuitry , where it might cause corrosion, a ground fault or a safety hazard.
Standard
According to IEC61215 MQT15 & IEC61730 MST17 testing standard requirement
Product specification:
| Product Model | HTPV-07 |
| Water tank size | customized |
| Water tank thickness | 15mm |
| Water tank material | resistance insulation and corrosion PP |
| Temperature control | 22±2ºC (:water constant temperature system researched and development by HOTOTECH) |
| Liquid resistivity | less than 3500Ω·cm |
| DC withstand voltage testing | |
| Output voltage range | 500-10KV |
| Output voltage accurate | +/-(3% set value+5V) |
| Output voltage resolution | 10V |
| Output the maximum rated power | 36VA (6000V 6mA) |
| Output voltage stability | +/-(1% set value+5V) |
| Voltage display(DC) | |
| Measure range | 0.01mA-6.000mA |
| Display resolution | 0.001mA |
| Measure accurate | +/-(1% set value+2 word) |
| Insulation voltage range | 500-200V (Uncertainty:3%) |
Company profile
